Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.utea.edu.pe/handle/utea/619
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorCallo Mamani, Anjhela Rosaes_ES
dc.contributor.authorArias Bedia, Bhissett Pilares_ES
dc.date.accessioned2023-12-15T19:55:27Z-
dc.date.available2023-12-15T19:55:27Z-
dc.date.issued2023-
dc.identifier.urihttps://repositorio.utea.edu.pe/handle/utea/619-
dc.description.abstractLa producción de biodiesel a partir de Aceites Domésticos Reciclados (ADR) es una alternativa potencial para las energías renovables. En este estudio se recolecto ADR de tres pollerías del centro poblado Las Américas. La recolección fue de 14L de aceite y se tomaron 3L para el estudio. Los resultados se compararon con la NTP 321.125 para biocombustibles y biodiésel, ASTM D 6751 y la EN 14214; para el índice de acidez del aceite, el Codex Alimentarius y para el Poder Calorífico Inferior (PCI) se utilizó la normativa argentina (2016). Para el aceite, se determinaron densidad aparente (923 kg/m3 ) e índice de acidez (1,823 mg KOH/g) del ADR; para el proceso de transesterificación se calculó el catalizador (NaOH) 1,064 g, generándose el metóxido con adición de 20 mL de metanol, el tiempo de reacción fue 2h, a una temperatura de 60-65 C.; se calculó su rendimiento en 39 %. Después, se envió el biodiésel al Laboratorio de Energía Renovables de la Universidad Nacional Agraria La Molina, para la determinación de sus parámetros fisicoquímicos. Los resultados fueron número de acidez (0,42 mg KOH/ g); residuo de carbón conradson (0,06 % m/m); viscosidad cinemática a 40°C (5,27 mm2 /seg); glicerol total (0,18 % m/m); glicerol libre (0,0 % m/m); contenido de humedad (0,06 % m/m); azufre (0,01 % m/m) y poder calorífico inferior (8.633,75 kcal/ kg). Se logró elaborar biodiésel a partir de aceites domésticos reciclados del centro poblado Las Américas de Abancay-Apurímac. Seis de los parámetros fisicoquímicos del biodiésel cumplen con la NTP.es_ES
dc.description.abstractBiodiesel production from Recycled Domestic Oils (ADR) is a potential alternative to renewable energy. In this study, ADR was collected from three poultry shops in the Las Américas populated center. The collection was 14L of oil and 3L were taken for the study. The results were compared with NTP 321.125 for biofuels and biodiesel, ASTM D 6751 and EN 14214; for the acidity index of the oil, the Codex Alimentarius and for the Lower Calorific Value (PCI) is governed by the Argentine regulations (2016). For the oil, the apparent density (923 kg/m3) and the acid value (1,823 mg KOH/g) of the ADR were determined; For the transesterification process, the catalyst (NaOH) was calculated at 1.064 g, generating the methoxide with the addition of 20 mL of methanol, the reaction time was 2h, at a temperature of 60-65 °C.; its yield was calculated at 39 %. Afterwards, the biodiesel was sent to the Renewable Energy Laboratory of the La Molina National Agrarian University, for the determination of its physicochemical parameters. The results were the acidity number (0,42 mg KOH/g); Conradson carbon residue (0,06% m/m); kinematic viscosity at 40°C (5,27 mm2/sec); total glycerol (0,18% m/m); free glycerol (0,0% m/m); moisture content (0,06% m/m); sulfur (0,01% m/m) and lower calorific value (8.633,75 kcal/kg). Biodiesel will be made from recycled domestic oils from the Las Américas de Abancay-Apurímac populated center. Six of the physicochemical parameters of biodiesel comply with the NTP.es_ES
dc.formatapplication/pdfes_ES
dc.language.isospaes_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/es_ES
dc.subjectaceite doméstico reciclado, biodiesel, transesterificación.es_ES
dc.subjectrecycled domestic oil, biodiesel, transesterification.es_ES
dc.titleElaboración de biodiesel a partir de aceites domésticos reciclados en el centro poblado de Las Américas, Abancay - Apurímac, 2019es_ES
dc.typeinfo:eu-repo/semantics/bachelorThesises_ES
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.07.01es_ES
thesis.degree.disciplineIngeniería Ambientales_ES
thesis.degree.nameIngeniero Ambientales_ES
thesis.degree.grantorUniversidad Tecnológica de los Andes. Facultad de Ingeniería.es_ES
thesis.degree.programRegulares_ES
thesis.degree.levelTítulo Profesionales_ES
dc.type.versioninfo:eu-repo/semantics/publishedVersiones_ES
dc.publisher.countryPEes_ES
renati.advisor.orcidhttps://orcid.org/0000-0002-9701-0103es_ES
renati.typehttps://purl.org/pe-repo/renati/type#tesises_ES
renati.levelhttps://purl.org/pe-repo/renati/nivel#tituloProfesionales_ES
renati.discipline521116es_ES
renati.jurorAlarcón Camacho, Juanes_ES
renati.jurorAlvarado Ramos, Jessicaes_ES
renati.jurorRojas Cáceres, Marielaes_ES
renati.advisor.dni43222360-
renati.author.dni70759278-
Aparece en las colecciones: Escuela Profesional de Ingeniería Ambiental

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Tesis-Arias Bedia Bhissett.pdfTesis978.7 kBAdobe PDFVista previa
Visualizar/Abrir
Tesis-Arias Bedia Bhissett-Similitud.pdf
  Restricted Access
Tesis-Similitud14.56 MBAdobe PDFVista previa
Visualizar/Abrir  Request a copy
Cesion derecho de publicacion.pdf
  Restricted Access
Cesión-Publicación802.21 kBAdobe PDFVista previa
Visualizar/Abrir  Request a copy


Este ítem está protegido por copyright original



Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons